ABOUT QSI AUTOMATION

QSI Automation, Inc. has been serving our customers since our founding in 1988. We design, build and service fully automated cells, feeder systems, injection molds, and plastic injection machinery along with providing custom machining services.

With more than 620 years of combined commitment and experience, we use our expertise to exceed customer expectations with our promise of Quality, Service, and Integrity.

Learn More

Why Work with QSI Automation

Full-service Solutions

We treat each project like it’s our own. From the first conversation to installation and services, QSI provides a level of attention and care that ensures the job is done right.

Manufacturing Experts

We’ve been in manufacturing long enough to know that no two operations are the same. We bring decades of boots-on-the-ground experience, and use that knowledge to build practical, effective systems that work on your operations both today and into the future.

Problem Solvers

We take pride in solving the challenges others walk away from. Whether it’s a tricky spec, a tight timeline, or something that’s never been done before, we roll up our sleeves and find a solution that meets our customer’s needs.

Collaboration

We believe in relationships, not transactions. That means active listening, honesty, showing up when it matters, and always doing right by our partners. When you work with us, you don’t get just a vendor, you gain a team that’s invested in your success.

Looking for technical details on our products and services? Call us today at 260-693-1500 or email us to discuss your project.

QSI THROUGH THE YEARS

1988

QSI Founded

Beginning from a garage, QSI Automation, Inc. was founded as a partnership in November of 1988. Initial business was in vibratory feeder bowls, conveying systems, control panels, and automated equipment.

1991

Alliance with IMM Manufacturer

In 1991, an alliance with an injection molding machine (IMM) supplier was formed to offer automated insert molding systems. This alliance continues today, as an important strategic partnership.

1997

Acquired Injection Mold Shop

In 1997, QSI acquired an experienced injection mold shop and brought this knowledge and capability in-house. Additional machining capabilities were also added, keeping virtually all machined components for industrial automation systems, injection molds and injection molding machine retrofits in-house.

2002

Plastics Machinery Group Launched

In 2002, the Plastics Machinery Group was launched. Responding to numerous requests from our customers to assist with their injection molding machine needs, QSI expanded by adding the technical experience to rebuild, retrofit and service our customers injection molding machinery.

2012

QSI Custom Machining Formed

QSI purchased a machining business and facility in 2012 and formed QSI Custom Machining. The additional facility and equipment suits the custom machining of larger scale plates and components.

2018

30 Years in Business

From a garage in 1988, to now two facilities totaling 35,000 sq. ft. and over 50 qualified and experienced employees, QSI has the capacity, knowledge and expertise to make your project a success.

2019

New 16,000 sq. ft. Expansion

In 2019, the Plastics Machinery Group moved into our newest building expansion. The additional room allows QSI to better serve our customer needs in the future.

2020

New Atlas Machine Launches

In 2020, the Plastics Machinery Group unveiled the newest line of Atlas Injection Molding Machines beginning with the PMG-30 30 Ton Horizontal/Vertical machine.

2022

3 Acres Added

In 2022, a purchase of 3 additional acres was finalized, allowing for more room to grow our facility.

2023

35 Years in Business

QSI is excited to meet another milestone in our years of service. The customer relationships we’ve developed have provided continued growth. With our now 70 employees and 50,000 sq. ft., we’re even better positioned to provide customer services with Quality, Service, & Integrity. QSI is excited for continued and future partnerships.

OUR PEOPLE

Jason T. Munk

Vice President

Jason T. Munk

Vice President

MBA from Indiana University, Fort Wayne

AS degree in Mechanical Engineering Technology from Purdue University

BS degree in Computer Integrated Manufacturing Technology from Purdue University

JT oversees the day-to-day operations of the business and focuses on maximizing the company’s operating performance. With his 15+ years of management experience and 8+ years of controls experience, JT strives to achieve the company’s financial goals and prepares the annual departmental business plans, as well as oversees the implementation and continual improvement of those plans. He is also actively involved in the interviewing and hiring of new candidates and daily employee interactions.

Phone:+1 (260) 693-1500
Email:sales@qsiautomation.com

Jeff Dull

Senior Sales & Automation Specialist

Jeff Dull

Senior Sales & Automation Specialist

DeVry University

Jeff has been a valued QSI employee since 1993 and brings solid experience across all areas of the business including previous roles as a Machine Assembler, Electrician, Maintenance Electrician, Controls Engineer, Controls Engineering Supervisor, Automation Department Manager, Senior Sales Engineer & Project Manager. Jeff’s depth of knowledge and customer relationships provide a solid foundation to the QSI sales team.

Phone:+1 (260) 693-1500
Email:sales@qsiautomation.com

Eric Smith

Senior Sales & Automation Specialist

Eric Smith

Senior Sales & Automation Specialist

Krannert School of Management, Purdue University

Eric joined our QSI family in 2015 and brought with him 13+ years of experience as an Operations Manager & Purchasing Manager, as well as Inside Sales experience. Eric’s extensive leadership experience and ability to easily connect with others makes him a quality QSI leader.

Phone:+1 (260) 693-1500
Email:sales@qsiautomation.com

Abe Stangland

Project Manager & Automation Sales

Abe Stangland

Project Manager & Automation Sales

Abe brings a diverse background in automation, engineering, and manufacturing to QSI. He has four years of experience assembling custom automation, specializing in robotics and feeder bowl systems, and two years as a Junior Industrial Engineer, focusing on controls, process development, and job launch.

A U.S. Marine Corps veteran, Abe served 4+ years as an Aircraft Ordinance Technician, including one year as a Quality Assurance Safety Observer. He was honorably discharged at the rank of Seargeant (E5) and carries with him the discipline, precision, and problem-solving skills instilled by his military service.

Now, as a Sales Engineer, Abe applies his technical expertise and customer-focused approach to deliver innovative automation solutions.

Phone:+1 (260) 693-1500
Email:sales@qsiautomation.com

Kent Shultz

Mold Department Manager

Kent Shultz

Mold Department Manager

With over 40 years in the plastics industry, Kent brings a wealth of experience to QSI. He has spent 10+ years as a Molding Supervisor, 27+ years as a Mold Design Engineer, and 2 years in management, giving him a deep understanding of both the technical and operational sides of the business.

Kent’s expertise spans plastic and rubber mold design, making him a valuable resource for innovative solutions and precision engineering. His extensive knowledge and leadership continue to contribute to the success of QSI and our customers.

Phone:+1 (260) 693-1500
Email:sales@qsiautomation.com

Ryan Berkes

Automation & Feeder Systems Manager

Ryan Berkes

Automation & Feeder Systems Manager

Completed 70+ college credit hours towards Mechanical Engineering Technology degree

US Army Warrior Leader Course Graduate, US Army Basic Non-Commissioned Officer Course Graduate, & US Army Senior Leadership Course Graduate

With 21 years in the US Army Reserves and over 10 years of Project Management experience, Ryan confidently leads our Automation & Feeder Bowl groups to success. Not only does Ryan have the project management experience needed to stay organized, his hands on experiences with feeder bowls and as a Controls Engineer and Mechanical Engineer provide him with a well-rounded approach to managing one of the largest parts of the business.

Phone:+1 (260) 693-1500
Email:sales@qsiautomation.com

Martin Muzzillo

Custom Machining & Toolroom Manager

Martin Muzzillo

Custom Machining & Toolroom Manager

Martin has been a vital part of QSI since 2016, leading our Custom Machining Group facility in Albion and overseeing our toolroom operations. With 25 years in the trade, he is an expert in the industry and a confident leader, ensuring precision, efficiency, and quality in every project. His experience and leadership play a key role in the success of our machining and tooling operations.

Phone:+1 (260) 693-1500
Email:custom@qsiautomation.com

Rich Taube

Plastics Machinery Group Manager

Rich Taube

Plastics Machinery Group Manager

BS degree in Electrical Engineering from Purdue University

Rich has been with QSI Automation since 2002 and has extensive knowledge in hydraulics, electrical, and control systems. Rich has held a variety of positions related to this business such as Service Technician, Training Coordinator, Service Supervisor, Manager of Contract Services, Engineering Manager, and Operations Manager. His 28+ years of experience with vertical injection molding machines has equipped him with knowledge in the areas of manufacturing, programming, service, retrofitting, rebuilding, safety training, and designing standard & custom machines, as well as developing new products.

Phone:+1 (260) 693-1500
Email:sales@qsiautomation.com

Amanda Knepper

HR Manager

Amanda Knepper

HR Manager

BS degree from Indiana University, Fort Wayne

As the HR Manager for QSI, Amanda manages all HR functions of the business including recruiting, onboarding, benefits management, attendance tracking, policies & procedures, employee events, and managing all employee relations. Her 15+ years of HR experience bring a solid foundation of HR policies and procedures, as well as a passion for serving others and maintaining positive employee relations across the business.

Phone:+1 (260) 693-1500
Email:careers@qsiautomation.com

John Parks

Project Manager & Automation Sales

John Parks

Project Manager & Automation Sales